Water 2 People Teknologies

Tube Settler Media

Tube Settler Media


Tube Settler Media that we offer has high settling surface area whilst maintaining a small structure. It has a chevron shaped self-supporting structure in a tubular form with six sides. Tube Settler Media finds wide usage in water treatment, primary and secondary clarifiers in waste water treatment. We are one of the pioneering Manufacturers and Suppliers of Tube Settler Media from Delhi, India.

 

Tube Settler Systems for Clarification
Tube settlers and parallel plates increase the settling capacity of circular clarifiers and/or rectangular sedimentation basins by reducing the vertical distance a floc particle must settle before agglomerating to form larger particles. Tube settlers 60 and adjacent to each other, which combine to form an increased effective setting area. This provides for a particle settling depth of a conventional clarifier, reducing settling times. Tube settlers capture the settleable fine floc that escapes the clarification zone beneath the tube settlers and allows the larger floc to travel to the tank bottom in a more settleable form. The tube settler’s channel collects solids into a compact mass which promotes the solids to slide down the tube channel.

Where can we use Tube Set Tube Settler
Residential and industrial waste water treatment plants, Potable water treatment plants, Oil separators,In rectangular or circular section reinforced concrete pools or sheet construction tanks, Tube Settler Lamella can be used, Shortly in all treatment plants where a good settling efficiency is expected. For some waste waters, a settling system using TUBE SET can become a stand-alone solution. Water parameters can be reduced to required criteria without needing to a chemical dosing, fast or slow mixing.

Advantages :

  • Increase Capacity of Clarifier
  • Enhance Particle agglomeration & Growth
  • Enhance Suspended Solids Concentration
  • Installation is Fast & Easy

 

Technical Specifications :

  • Plain Settling Area of Media : 60o Slope – 11.0 m2/m3, 55o Slope – 13.0 m2/m3
  • Cross Sectional Area : 120 mm x 44 mm
  • Shape : Hexagonal Chevron
  • Hydraulic Radius : 1.5 cm
  • MOC of Media : PVC
  • Thickness : 1.1 mm (+/- 0.1 mm)
  • Filling Arrangement : Tongue & Groove
  • Maximum Cont. Op. Temp :  55oC
  • Color : Black
  • Distance Between Tubes : Horizontal - 120 mm & Vertical – 44 mm
  • Separator Height : 500 mm – 5.5 m2 Settling Area / m2, 750 mm – 8.25 m2 Settling Area / m2, 1000 mm – 11.0 m2 Settling Area / m2


Features :

  • Increase Capacity of Clarifier
  • Enhance Particle agglomeration & Growth
  • Enhance Suspended Solids Concentration
  • Installation is Fast & Easy


  • Image 01

  • Image 02

  • Image 03